Have A Tips About How To Check Timing Sr20det
If your using a decent timing light that you can set the figure of timing you want on the back of the gun then dial in ya 15degrees your then use 2nd from the left as thats tdc!
How to check timing sr20det. Set idle to 750rpm give or take.turn off engine.unplug tpsrestart motor. Check your timing, you want to be just under half. The easiest way to differentiate the generations is by the color of the valve cover.
If you see any sparks from the wires to the valve cover, replace. Initially, the sr20det featured a “red top” valve cover. Connect your timing light to plug 1 (closest to the passenger side of the car).
Step 1 how to set crank angle sensor (cas) timing on the sr20det hand crank the engine until the two dark chain links line up with the notches on the cam sprockets. Start your engine and let it warm up to normal operating temperature. Replace the screws & plug in your cas.
Let run until cold idle is finished.